When we talk about choosing a CBD e-liquid for a vaping device, we
usually focus on flavor, milligram strength and cutting agents. Rarely do we get into the importance of
choosing the right vape juice based on the needs of one’s coil. But, as it turns out, the e-liquid you select
and the coil installed in your setup need to be just as compatible as, say, the
resistance level of your coil and the wattage of your device.
As it turns out, some CBD vape juices may actually
damage the coil of your vaping setup, based on compatibility issues, quality issues
or something else entirely. Before we get into that, let’s explain the
important relationship between your selected e-juice and the coil of your
device.
The Function of Your Device’s Coil
The coil that is found in a cartridge or vape tank is
in charge of vaporizing the e-liquid, which means it cannot be vaped without
one. It’s a heating element consisting
of a wire and a wick, with the wire providing heat to the e-juice that has
absorbed into the wick. This allows the
coil to heat the right amount of liquid at a time, making sure it reaches the
proper temperature in order to turn that vape oil into smooth, flavorful, and
potent clouds.
The Relationship Between CBD E-Liquid and Your Coil
The CBD e-liquid has an especially important
relationship to your coil, as it’s what is being fed to the coil’s wick. Therefore, the e-juice that’s in the tank or
cartridge must be capable of absorbing into the wick properly so as not to
cause a clog or contain poor ingredients that cause the liquid to burn, thus
burning the coil itself.
What CBD E-Juices Can Cause Damage to the Coil of Your Device
Now, let’s cover the factors that can cause damage to
your coil based on the qualities of the CBD e-liquid. It is important to avoid these factors listed
below if you want to have a successful vaping experience, and not waste money
on either coils or liquid.
Note: We are only talking about vaping systems that
use refillable tanks or cartridges, as pre-filled options come with CBD e-liquid
that was selected appropriately for the needs of the coil.
#1: Too Much Sugar
Choosing a CBD e-liquid that is extremely sweet may be
great for someone who wants a sugary taste when they vape, but it may not be
ideal for your coil. This is because
sugar burns onto the coil, causing a layer of gunk to develop that interferes
with the coil’s ability to operate.
Sugar gunk can cause the coil to become clogged, and it takes on a burnt
taste that makes your vaping experience’s flavor less than ideal.
#2: Low-Quality Ingredients
CBD vape juices made with cheap, low-quality
ingredients may cause damage to your coil as they are simply not intended to be
vaporized, or even heated to such high temperatures. Make sure that when you’re shopping for hemp
vape oils, you look at the ingredients thoroughly. Ingredients that are fine for e-liquids
include, besides hemp itself, VG (vegetable glycerin), PG (propylene glycol)
and MCT oil. Other ingredients should be
researched to ensure that they’re appropriate for vaping.
#3: The Wrong Type of Setup
Some CBD e-liquids may not be compatible with the
device that you are using, which can cause the coil to become damaged because
it’s just not compatible with what you’re using. When shopping for these specific vape juices,
always read the product description to find out what type of device it’s
for. For instance, some high-wattage
systems may burn the compounds in the hemp vape oil, while also causing the
coil to burn out at the same time.
#4: E-Liquid That is Too Thin
An e-liquid that has a very thin consistency may be
bad for your coil, because the wick burns the liquid due to its low boiling
point. This is bad for your e-juice, and
it’s bad for your coil too, because the coil may end up burning out while
trying to heat the liquid to the right temperature.
Coil Condition Matters
CBD e-liquid is a great way to enjoy the properties
that cannabidiol has to offer, but there is a right way and a wrong way to
vaporize it. It is important to choose
the e-liquid that’s best suited for your vaping device in order to protect your
coil, which can become damaged by cheap, low-quality, or simply incompatible
formulas.
Leave a Reply