Using a rebuildable atomizer comes with loads
of advantages. It allows you to save
money by creating your own coils while enabling you to experiment with a wide
range of unique coil configurations.
Plus, this type of atomizer allows you to understand vaping technology
on a whole new level.
However, when it comes to changing your e-liquid,
things aren’t quite as simple as they are when using a conventional sub-ohm
tank. While sub-ohm tanks allow you to
simply throw out the coil, rinse out the glass and refill, rebuildable
atomizers require a bit more care.
Changing Your Vape Juice According to the Type of Atomizer You’re Using
Good news vapers, it’s fairly easy to change your vape juice while using a
rebuildable atomizer. The key is
eliminating any trace of e-liquid that’s left behind before you add your new
flavor into that atty. As you will see,
this process varies depending on whether you’re using an RDA, an RBA or an RTA.
RDAs
Because an RDA is made for dripping, it doesn’t
require a ton of effort in order to try a new e-liquid flavor. Because of the nature of RDAs, all that you
have to do is simply remove the cotton wick as it’s saturated in the previous
e-liquid. This will ensure that you
don’t taste any of the old e-liquid while trying to enjoy a new flavor.
Sometimes, little cotton fibers will be clinging onto
the coil, even after you’ve removed the wick.
These fibers will indeed affect the flavor of your new e-liquid. Luckily, getting rid of them simply requires
that you fire your device a couple of times at a low wattage in order to burn
them away.
RTAs
Because an RTA has a juice well, you’re going to need
to put just a little more effort into ridding it of traces of e-liquid. Because this type of atomizer closely resembles a standard sub-ohm tank, the
cleaning techniques aren’t that different.
Just like you would with an RDA, completely remove the
cotton from the atomizer. The cotton is
still saturated in your last e-liquid, meaning that it will affect the flavor
of your new e-liquid. Then, burn off any
remaining cotton fibers by firing your device at a low wattage a couple of
times.
Next, take apart the tank and gently run each piece
under water for a few seconds. To ensure
that no traces of e-liquid are left behind, smell each piece of the tank in
order to make sure that you can’t detect the scent of your last e-liquid’s
flavor. Then, carefully dry each piece
off and reassemble your atomizer.
RBAs
An RBA is unique in that it allows you to use
conventional, pre-built coils while featuring a build deck so that you can make
your own. When it comes to changing
e-liquid with an RBA, the process is exactly the same as cleaning an RTA. Remove the cotton piece, burn off excess
cotton and give each component a good rinse.
Then, put your atomizer back together and you’re good to go.
Something to Keep in Mind
Many vapers experience some despair at the thought of
throwing out a piece of cotton that they’ve only just installed. If you hate the idea of wasting money,
consider saving your cotton wicks for the next time that you’ll be using that
same vape juice flavor. So, once again,
in order to truly enjoy the flavor of your new e-liquid, make sure that you
thoroughly rid your atty of traces of old e-juice.
Leave a Reply