When you’re working on your vape gear, you want to
have a clean work area that is free from distractions or other problems that
could make it difficult for you to get everything done. A dirty work area will make it easy for you to
lose the screws to your vaper, drop coils in the mess, and completely ruin your
vaper.
Follow these basic tips to keep your work area clean
and free of mess.
Tip #1: Take A Look At Your Area Before Starting
Before you sit down to work on your vaper, take a look
at your work area. Are there any spilled
fluid stains from that batch of e-liquid
you were creating that should be wiped up?
Is there a half-finished project just sitting there, screaming for you
to finish it?
Clean all that up before you start. Take any project you don’t plan on working on
just then and store it in a plastic container to keep it safe. Wipe up your area and disinfect it with
cleaner to keep it free from infectants.
Tip #2: Have Storage Containers Handy
After cleaning up your work area, you need to sit down
and get to work. You should always have
small storage containers handy for these situations. Small plastic Tupperware tubs are perfect here
because they are inexpensive, easy to store, and can be sealed. As you work,
place items you don’t need in these items.
For example, if you are installing new coils in your
tank, you could place your screws in the tub, as well as used coils or other
items. You can also work over a small
tub when opening up your tank, in case any spills occur. This keeps the e-liquid from staining your
work area.
Tip #3: Know What You’re Doing Before Working
Always have a basic idea of what you’re doing in your
work area when you sit down to work. In
this way, you can avoid just messing around with your coils and tanks without a
purpose. Absent minded fiddling may
result in some cool upgrades, but it can also result in losing interest halfway
through and leaving a mess in your work area.
That doesn’t mean you shouldn’t have some fun
experimenting, though! DIY vaper
adjustments are all about finding cool ways to make your vaper awesome. It’s just a good idea to know what you’re
doing at the beginning and venturing off into a few experimental areas, time
and talent allowing.
Tip #4: Streamline The Process Logically
You should also streamline your work process in a way
that makes sense and is logical to your goals. For example, if you’re removing some coils
from your tank to install new ones, you should have small tubs for the screws,
another for the old coils, one where you can place the open tank, and another
for the new coils.
You are creating a sort of “assembly line” process
here that streamlines your experimentation and makes it harder for you to make
a mess. Prevention of messes is the best
way to keep your area clean, and the easiest way to do that, is by making the
process as streamlined as possible.
Vaping Cleanliness and Proper Organization are Keys to a Successful
Experience
As you can see, it is possible to not only keep your
work area clean, but to do so in a way that actually improves your work
quality. Cleanliness and precision are crucial to working on your vaping
equipment properly. The cleaner you keep your work area, the better your
adjustments will be.
Leave a Reply